Carburizer is a kind of carbon-containing substance, adding carburizer in the smelting process is to supplement the carbon content burned during the smelting of steel. We know that there are many kinds of carburants, such as petroleum coke carburants, artificial graphite carburants, etc., so the raw materials required for the production of carburants are also different, so what are the raw materials for the production of carburants? What is the production process? Below, Bi Chang's Xiaobian will talk to you about the raw materials and production process required for the production of carburizing agents.

Carburizer belongs to additional steel and iron carburizing raw materials. High quality carburizer is an indispensable auxiliary additive in the production of high quality steel.

Silicon carbon alloy is a new type of alloy used in converter, which can replace ferro silicon, silicon carbide, carburizing agent, reduce the amount of deoxidizing agent, and is used in converter smelting deoxidizing alloying process. Silicon carbon alloy block is a kind of deoxidized alloy in converter smelting, the effect is stable, and the chemical composition, mechanical properties and internal control quality of steel are better than the traditional process.

Silicon carbide powder is a micron level silicon carbide powder, mainly used in the abrasive industry, and its grade classification is very strict, do not allow large particles appear, is a new used in the process of steel deoxidation materials, with increased carburization, silicon, manganese absorption rate effect, has completely replaced the traditional use of iron silicon, high carbon manganese, the cost reduction effect is obvious, It is of great value to improve the comprehensive economic benefit of steelmaking.

The main raw material of silicon slag ball comes from the slag produced in the production of ferro silicon or silicon metal, which is collected and processed to make usable silicon slag ball, so as to achieve the purpose of saving the cost of steelmaking. It is not a simple smelting product, and the main content of silicon slag ball is silicon, carbon, aluminum and other trace elements.

Silicon barium ferro alloy is an important iron alloy, also known as ferro silicon. It is composed of elements such as silicon barium, magnesium and iron. Ferro silicon alloy has excellent corrosion resistance, high temperature stability, oxidation resistance and high strength, so it is widely used in metallurgy, machinery manufacturing, electronics industry and other fields.

Inoculant is a necessary additive in casting production. In the production of cast iron, inoculant can refine grains, reduce white edges, promote graphitization and improve the strength of gray cast iron.In addition, inoculant can also increase the content of the cast element and increase the elongation of ductile iron.

Microsilica powder is also called silica fume or condensed silica fume. When ferro alloy is smelting ferro silicon and industrial silicon (silicon metal), a large number of highly volatile SiO2 and Si gases are produced in the mineral-thermal electric furnace, and the gas is rapidly oxidized and condensed with the air after discharge.

Ferro silicon nitride has been widely used in blast furnace blast mud, which greatly improves the plugging property of blast furnace, meets the need of blast furnace iron production, and becomes an indispensable part of modern large blast furnace blast mud. In addition, adding a small amount of ferro silicon nitride to the raw material of the iron ditch greatly increased the iron flux of the iron ditch.

Ferro manganese nitride is an indispensable alloying agent for the production of special alloy steel, stainless steel and heat-resistant steel, which is usually obtained by filling nitrogen with medium and low carbon ferro manganese. Ferric manganese nitride is mainly used as a nitrogen additive in steelmaking production, which can improve the mechanical properties such as steel strength, fine grains, and stabilize austenite.

alloy cored wire is conducive to adjusting and controlling the content of easily oxidized elements and trace elements, which can greatly fluctuate and improve the power, reduce the exercise cost, shorten the exercise time

Ferro silicon block is an important industrial raw material, mainly used in the iron and steel industry and casting industry. When choosing a ferro silicon block, the following aspects should be considered: